High-Feed Single-Sided Inserts – HFBD Series

Single-sided high-feed HFBD inserts provide the ultimate roughing capability for smaller-diameter ball nose end mill applications:

3/8" to 1" diameter
Use for cavity/core roughing, pocketing, detail area roughing and helical interpolation
Must be run with a BNEM cutter body (will not fit BDEM cutters)

D Ø Dia.	Insert	Uses Cutter	Program Radius	Corner Radius	FPT- Adjusted*	Max. DOC
3/8"	HFBD-0375	BNEM0375 / GWR10**	.0295"	.020"	.010-.020	.013"
1/2"	HFBD-0500	BNEM0500 / GWR12**	.0558"	.034"	.012-.025	.020"
5/8"	HFBD-0625	BNEM0625 / GWR16**	.0766"	.048"	.012-.030	.025"
3/4"	HFBD-0750	BNEM0750 / GWR20**	.0852"	.062"	.012-.040	.028"
1"	HFBD-1000	BNEM1000 / GWR25**	.1104"	.076"	.012-.040	.033"

* FPT is already adjusted for high-feed chip thinning. Use the actual FPT shown to calculate the feed in IPM (inches per minute).

** MOD, Undersized Cutters or Metric.

DAPRA recommends a maximum 1° ramp angle on these inserts.

** Start with these filters – they will guide you to the right insert for your application **

Dia

Best For

Coating

Grade

Viewing Page 1 of 1 (5 results)

Item	Dia	Best For	Coating	Grade	Price	Inventory
Part #: 42025 HFBD-0375-FP-HM	0.375"	ISO	1-High-temp Hard	FP-HM	Please Log In	In Stock Order multiples of 10 EA
Part #: 42065 HFBD-0500-FP-HM	0.500"	ISO	1-High-temp Hard	FP-HM	Please Log In	In Stock UOM : EA
Part #: 42085 HFBD-0625-FP-HM	0.625"	ISO	1-High-temp Hard	FP-HM	Please Log In	In Stock Order multiples of 10 EA
Part #: 42135 HFBD-0750-FP-HM	0.750"	ISO	1-High-temp Hard	FP-HM	Please Log In	In Stock Order multiples of 10 EA
Part #: 42165 HFBD-1000-FP-HM	1.000"	ISO	1-High-temp Hard	FP-HM	Please Log In	In Stock Order multiples of 10 EA