High-Feed Single-Sided Inserts – HFBD Series
Single-sided high-feed HFBD inserts provide the ultimate roughing capability for smaller-diameter ball nose end mill applications:
- 3/8" to 1" diameter
- Use for cavity/core roughing, pocketing, detail area roughing and helical interpolation
- Must be run with a BNEM cutter body (will not fit BDEM cutters)
| D Ø Dia. |
Insert | Uses Cutter | Program Radius | Corner Radius | FPT- Adjusted* |
Max. DOC |
|---|---|---|---|---|---|---|
| 3/8" | HFBD-0375 | BNEM0375 / GWR10** | .0295" | .020" | .010-.020 | .013" |
| 1/2" | HFBD-0500 | BNEM0500 / GWR12** | .0558" | .034" | .012-.025 | .020" |
| 5/8" | HFBD-0625 | BNEM0625 / GWR16** | .0766" | .048" | .012-.030 | .025" |
| 3/4" | HFBD-0750 | BNEM0750 / GWR20** | .0852" | .062" | .012-.040 | .028" |
| 1" | HFBD-1000 | BNEM1000 / GWR25** | .1104" | .076" | .012-.040 | .033" |
* FPT is already adjusted for high-feed chip thinning. Use the actual FPT shown to calculate the feed in IPM (inches per minute).
** MOD, Undersized Cutters or Metric.
DAPRA recommends a maximum 1° ramp angle on these inserts.
** Start with these filters – they will guide you to the right insert for your application **
Indexable MillingBall Nose / Back DraftSingle-Sided Insert PlatformInserts – Inch SizesHFBD Series – High-Feed
Viewing Page 1 of 1
(1 results)
View:
| Item | Dia | Best For | Coating | Grade | Price | Inventory | ||
|---|---|---|---|---|---|---|---|---|
|
42050 HFBD-0500-FP-GLH |
0.500" | ISO | 2-Slick High-temp | FP-GLH |
In Stock
Order multiples of 10 EA |
|
42050
HFBD-0500-FP-GLH
- 0.500"
- ISO
- 2-Slick High-temp
- FP-GLH
