NEW 12mm Square Shoulder Cutters and Inserts

12mm Square Shoulder End Mills

Square Shoulder End Mill
12mm End Mills
OD
Diameter
Holder Max
DOC
Flutes S
Shank Dia.
L
Overall Length
R
Effective Length
CAD File
.625" SSEM0625-0625-R45-1C .430" 1 .625" 3.00" 1.09" DXF
.750" SSEM0750-0750-R45-2C .430" 2 .750" 3.50" 1.47" DXF
.750" SSEM0750-0750-R45-2LC .430" 2 .750" 4.28" 2.25" DXF
1.000" SSEM1000-1000-R45-3SC .430" 3 1.000" 3.28" 1.00" DXF
1.000" SSEM1000-1000-R45-3C .430" 3 1.000" 4.28" 2.00" DXF
1.000" SSEM1000-1000-R45-3LC .430" 3 1.000" 5.28" 3.00" DXF
1.250" SSEM1250-1250-R45-4C .430" 4 1.250" 4.78" 2.50" DXF
1.250" SSEM1250-1250-R45-4LC .430" 4 1.250" 6.03" 3.75" DXF
1.500" SSEM1500-1250-R45-5C .430" 5 1.250" 4.78" 2.50" DXF

12mm Square Shoulder Standard Pitch Shell Mills

"C" denotes coolant thru tool

 
Square Shoulder Shell Mill
12mm Standard Pitch Shell Mills
OD
Diameter
Holder Max
DOC
Flutes B
Arbor Dia.
R
Effective Length
H
Counter Bore
Dia.
CAD File
1.500" SSSM1500-0750-R45-5C .430" 5 .750" 1.75" .58" DXF
2.000" SSSM2000-0750-R45-5C .430" 5 .750" 1.50" .60" DXF
2.000" SSSM2000-0750-R45-7C .430" 7 .750" 1.50" .60" DXF
2.500" SSSM2500-1000-R45-8C .430" 8 1.000" 1.75" .80" DXF
3.000" SSSM3000-1000-R45-7C .430" 7 1.000" 2.00" .80" DXF
3.000" SSSM3000-1000-R45-10C .430" 10 1.000" 2.00" .80" DXF
4.000" SSSM4000-1500-R45-12 .430" 12 1.500" 2.00" 1.90" DXF

12mm Square Shoulder Extended Reach End Mills

Square Shoulder 12mm Extended Reach End Mill
12mm Extended Reach End Mills
OD: Diameter Holder Max: DOC Flutes S: Shank Dia. L: Overall Length R: Effective Length CAD File
.625" SSER0625-7000-SS-R45-1C-WOF* .430" 1 .6250" 7.00" 1.09" DXF
.750" SSER0750-7000-SS-R45-2C-WOF* .430" 2 .7500" 7.00" 1.45" DXF
1.000" SSER1000-9000-SS-R45-2C-WOF* .430" 2 1.000" 9.00" 2.00" DXF
1.250" SSER1250-10000-SS-R45-2C-WOF* .430" 2 1.250" 10.00" 2.50" DXF

"C" denotes coolant thru tool.

* Cylindrical shank – no Weldon flats.

12mm Square Shoulder Extended Reach End Mills with Carbide Core

Carbide Core Extended Reach End Mill
12mm Carbide Core Extended Reach End Mills
OD
Diameter
Holder Max
DOC
Flutes S
Shank Dia.
L
Overall Length
R
Effective Length
CAD File
1.000" CC-SSER1000-6000-R45-3 .430" 3 1.250" 8.29" 6.00" DXF
1.000" CC-SSER1000-4000-R45-3 .430" 3 1.250" 6.29" 4.00" DXF
.750" CC-SSER0750-4000-R45-2 .430" 2 1.000" 6.30" 4.00" DXF
CNC Pressed Insert

• Stocked Standard

12mm Inserts and Grades
  Uncoated Coated
Insert L W R DMP35
DMP30
DMK25
DMP353
DMP303
DMK253
DMP35-HP
DMP30-HP
DMK25-HP
DMP357
DMP307
DMK257
NEW GRADE!
DMP35-TCI
DMP30-TCI
DMK25-TCI
DMP35-GLH
DMP30-GLH
DMK25-GLH
APET inserts feature a high-strength cutting edge and are ideal for high-performance milling of most harder steels and cast irons.
APET120408 .472" .312" .031"
APET120416 .472" .312" .062"
APET120431 .472" .312" .120"
XPET inserts are ideal for high-performance milling of stainless steels and nonferrous materials such as copper alloys and aluminum. Also good for gummy, softer, free-machining steels.
XPET120408 .472" .312" .031"
XPET120416 .472" .312" .062"
XPET120431 .472" .312" .120"
XPET-ALU lapped inserts feature a ground and lapped rake face for machining aluminum and copper alloys, bronze, brass, etc. Built-up edge is virtually eliminated.
XPET120408-ALU .472" .312" .031" DMK25 ONLY DMK253 ONLY DMK25-HP ONLY DMK257 ONLY DMK25-TCI ONLY DMK25-GLH ONLY
XPET120416-ALU .472" .312" .062"
XPET120431-ALU .472" .312" .120"
PCD-tipped inserts provide the ultimate in wear resistance for high-volume aluminum or graphite milling. Available in 1/32" corner radius only.
XPET120408-PCD-150 .472" .312" .031" DMK25 ONLY  
 
 

A Proud USA Manufacturer