10mm Square Shoulder Cutters and Inserts

10mm Square Shoulder End Mills

"C" denotes coolant thru tool

1.25" cutters and smaller are available without Weldon flats in limited supplies. Add WOF to end of part number when ordering.

Square Shoulder End Mill
10mm End Mills
OD
Diameter
Holder Max
DOC
Flutes S
Shank Dia.
L
Overall Length
R
Effective Length
CAD File
.500" SSEM0500-0625-R35-1 .350" 1 .625" 2.75" .97" DXF
.625" SSEM0625-0625-R35-2 .350" 2 .625" 3.00" 1.09" DXF
.750" SSEM0750-0750-R35-2 .350" 2 .750" 3.50" 1.47" DXF
.750" SSEM0750-0750-R35-2C .350" 2 .750" 3.50" 1.47" DXF
.750" SSEM0750-0750-R35-3 .350" 3 .750" 3.50" 1.47" DXF
1.000" SSEM1000-0750-R35-4 .350" 4 .750" 3.50" 1.47" DXF
1.000" SSEM1000-1000-R35-3C .350" 3 1.000" 4.00" 1.72" DXF
1.250" SSEM1250-1250-R35-5C .350" 5 1.250" 4.78" 2.50" DXF
1.500" SSEM1500-1250-R35-6C .350" 6 1.250" 4.78" 2.50" DXF

10mm Square Shoulder Extended Reach End Mills

"C" denotes coolant thru tool.

* Cylindrical shank – no Weldon flats.

Square Shoulder Extended Reach End Mill
10mm Extended Reach End Mills
OD
Diameter
Holder Max
DOC
Flutes S
Shank Dia.
L
Overall Length
R
Effective Length
CAD File
.500" SSER0500-2000-R35-1 .350" 1 .625" 3.91" 2.00" DXF
.625" SSER0625-2500-R35-2C .350" 2 .750" 4.41" 2.50" DXF
.625" SSER0625-7000-SS-R35-2-WOF* .350" 2 .625" 7.00" 1.25" DXF
.750" SSER0750-2500-R35-2C .350" 2 1.000" 4.78" 2.50" DXF
.750" SSER0750-4000-R35-2C .350" 2 1.000" 6.28" 4.00" DXF
.750" SSER0750-7000-SS-R35-2-WOF* .350" 2 .750" 7.00" 1.13" DXF

10mm Square Shoulder Extended Reach End Mills with Carbide Core

Carbide Core Extended Reach End Mill
10mm Carbide Core Extended Reach End Mills
OD
Diameter
Holder Max
DOC
Flutes S
Shank Dia.
L
Overall Length
R
Effective Length
CAD File
.750" CC-SSER0750-2500-R35-2 .350" 2 1.000" 4.78" 2.50" DXF
.750" CC-SSER0750-4000-R35-2 .350" 2 1.000" 6.28" 4.00" DXF
CNC Pressed Insert

10mm Inserts and Grades
  Uncoated Coated
  DMP35
DMK30†
DMP30
DMK25
DMP353
DMK303†
DMP303
DMK253
DMP35-HP
DMK30-HP†
DMP30-HP
DMK25-HP
DMP357
DMK307
DMP307
DMK257
NEW GRADE!
DMP35-TCI
DMK30-TCI
DMP30-TCI
DMK25-TCI
DMP35-GLH
DMK30-GLH
DMP30-GLH
DMK25-GLH
Insert L W R
APET inserts feature a high-strength cutting edge and are ideal for high-performance milling of most harder steels and cast irons.
APET100308 .380" .250" .031"
APET100316 .380" .250" .062"
XPET inserts are ideal for high-performance milling of stainless steels and nonferrous materials such as copper alloys and aluminum. Also good for gummy, softer, free-machining steels.
XPET100308 .380" .250" .031"
XPET100316 .380" .250" .062"
XPET-ALU lapped inserts feature a ground and lapped rake face for machining aluminum and copper alloys, bronze, brass, etc. Built-up edge is virtually eliminated.
XPET100308-ALU* .380" .250" .031" o
XPET100316-ALU* .380" .250" .062" o o o

† Available for XPET only.  * XPET-ALU inserts available in DMK25 substrate only.

 

 

A Proud USA Manufacturer