R2  Mini-Feed Bodies & Inserts

R2 Mini-Feed Cutter Bodies

End Mills are solid steel, manufactured for coolant thru tool.

R2 Mini-Feed Cutter Bodies
End Mills R2 – 8mm IC
OD
Dia.
Holder R
Effective Length
L
Overall Length
S
Shank Dia.
Flutes DOC Recommended Insert CAD File
.500" HFEM050-150-R2-1 1.500" 3.530" .750" 1 .010-.015" RF08 DXF
.500" HFEM050-250-R2-1 2.500" 4.530" .750" 1 .010-.015" RF08 DXF
.625" HFEM063-200-R2-1 2.000" 4.030" .750" 1 .010-.025" RF08 DXF
.625" HFEM063-300-R2-1 3.000" 5.030" .750" 1 .010-.020" RF08 DXF
.750" HFEM075-200-R2-2 2.000" 4.030" .750" 2 .010-.025" RF08 DXF
.750" HFEM075-300-R2-2 3.000" 5.030" .750" 2 .010-.020" RF08 DXF
1.000" HFEM100-250-R2-3 2.500" 4.750" 1.000" 3 .010-.025" RF08 DXF
1.000" HFEM100-450-R2-3 4.500" 6.750" 1.000" 3 .010-.025" RF08 DXF

Mini-Feed Inserts

Dished Cutting Edge"D" inserts have a positive cutting geometry, designed to reduce cutting forces and heat. This edge is suitable for all materials.
Mini-Feed Inserts
Insert IC Thickness # of Usable Edges Corner Radius (Actual) Corner Radius (Program) DOC (Max.) DOC (Recommended) FPT
(Compensated)
RF08-D 8MM .125" 3 .062" .088" .030" .010-.025" .012-.032"
* A special corner radius value is required for correct programming of a high-feed insert. Using the program radius avoids gouging of the corners in the workpiece material.
The high-feed insert will naturally leave a small amount of extra material at the bottom-most layer of the cut, at the intersection of the wall and pocket floor.
RHINO-FEED inserts are labeled with dots to indicate die position during pressing. For the most accurate runout when loaded into the cutter body, make sure each insert is loaded with the corresponding edge.

Click here for operating instructions for mini-feed inserts.

Mini-Feed RF08 Grade Availability
Uncoated With Coating
DMK30
D
DMK30-GLH
D
DMK30-TCI
D
The older "HP" coating has been replaced by the new "TCI" grade. "HP" is available upon request, but will typically have a 1-2 week delivery time.
DMK25
D
DMK25-GLH
D
NEW GRADE!
DMP25
D
DMP25-GLH
D
DMP25-TCI
D

A Proud USA Manufacturer