SBN Finishing Series Cutter Bodies

SBN Finishing Series Standard Shank End Mills

  • Thru-hardened steel shanks
  • EDM pocket for optimum strength and accuracy
  • Straight inch or metric shanks
SBN End Mills – Standard Shank
SBN End Mills – Standard Shank
  Part Number Cutting Diameter A
Ø
B
Straight Length
C
Taper End Ø
D
Shank Ø
E
Effective Length
T
Taper Angle
L
Overall Length
CAD File
Inch
Shank
SBNEM-0500-7000-SS 0.500" 0.450" 0.750" 0.470" 0.500" 1.250" 1.7˚ 7.000" DXF
SBNEM-0750-7500-SS 0.750" 0.670" 1.000" 0.720" 0.750" 1.880" 1.5˚ 7.500" DXF
SBNEM-1000-8000-SS 1.000" 0.890" 1.500" 0.970" 1.000" 2.500" 2.2˚ 8.000" DXF
Metric
Shank
SBNEM-0500-7000-SS-12MM 0.500" 0.450" 1.250" Straight 12mm 1.250" N/A 7.000" DXF
SBNEM-0750-10000-SS-18MM 0.750" 0.670" 1.880" Straight 18mm 1.880" N/A 10.000" DXF
SBNEM-1000-10000-SS-25MM 1.000" 0.890" 1.500" 0.970" 25mm 2.500" 1.7˚ 10.000" DXF
 
 

SBN Finishing Series Solid Carbide End Mills

Achieve Maximum Performance with Solid Carbide Cutter Bodies!

Optimize performance with Carbide Shank tooling:

  • reduced deflection
  • increased stiffness
  • less chatter
  • heat shrink toolholding capability (SBN with Solid Carbide Shank only)

* Keep brazed joint a minimum of 2" away from heat shrink toolholder. SC (Solid Carbide Shank) tooling is suitable for FINISHING APPLICATIONS ONLY. SC tooling is NOT suitable for roughing and applications with significant heat.

SBN End Mills – Solid Carbide Shank
SBN End Mills – Solid Carbide Shank
  Part Number Cutting Diameter A
Ø
B
Straight Length
C
Taper End Ø
D
Shank Ø
E
Effective Length
T
Taper Angle
L
Overall Length
CAD File
Inch
Shank
SC-SBNEM-0500-7000-SS 0.500" 0.450" 0.750" 0.470" 0.500" 2.000" 0.70˚ 7.000" DXF
SC-SBNEM-0750-7500-SS 0.750" 0.670" 1.000" 0.720" 0.750" 2.500" 1.00˚ 7.500" DXF
SC-SBNEM-0750-10000-SS 0.750" 0.670" 1.000" 0.720" 0.750" 3.750" 0.50˚ 10.000" DXF
SC-SBNEM-1000-8000-SS 1.000" 0.890" 1.500" 0.970" 1.000" 3.000" 2.25˚ 8.000" DXF
SC-SBNEM-1000-11000-SS 1.000" 0.890" 1.500" 0.970" 1.000" 4.500" 0.75˚ 11.000" DXF
Metric
Shank
SC-SBNEM-0500-7000-SS-12MM 0.500" 0.450" N/A N/A 12mm 1.250" N/A 7.000" DXF
 
 

SBN Finishing Series Carbide Core End Mills

Achieve Higher Performance with Carbide Core Cutter Bodies!

Optimize performance with Carbide Core tooling:

  • reduced deflection
  • increased stiffness
  • less chatter
SBN End Mills – Carbide Core Shank
SBN End Mills – Carbide Core Shank
Part Number Cutting Diameter A
Ø
B
Straight Length
C
Taper End Ø
D
Shank Ø
E
Effective Length
T
Taper Angle
L
Overall Length
CAD File
CC-SBNEM-0750-9000-SS 0.750" 0.450" 1.000" 0.720" 0.750" 2.250" 1.10˚ 9.000" DXF
CC-SBNEM-1000-8000-SS 1.000" 0.890" 1.500" 0.970" 1.000" 3.000" 1.50˚ 8.000" DXF